You must un-record-arm the track before playing it back. Speak moderately loudly into the microphone and see if you see any waveform and can hear anything playing back. Try recording (you are arming the track and transport correctly). Now create a mono audio track, with the input set to input 1. On the interface turn up the gain to ~3/4. If you do not know what a balanced XLR cable is (XLR connector at both ends) Google it. Microphone connected to a balanced XLR (not 1/4” TRS) into the input 1 multi-connector on the front of the interface.ĭisconnect anything else unneeded from the interface. Are you able to at least click on them and see them? If so, can you see where my setup is wrong?

Apparently my images aren't working in my post above. I'm on hour 9 of this problem and am quite frustrated. I appreciate the link, but I don't see my issue in there. I have searched the message boards here and google and have not found any answers that apply to my problem. I'm sure the problem is in the audio settings, but I don't know what else to change at this point. I am not getting any signal coming in from Pro Tools, there is no green line. If not then most likely you have to go back to drivers and or core audio settings but before that make sure that your interface is selected as the Playback engine. Play or sing and note if there is any 'signal' (green line) coming into Pro Tools. If you are monitoring with headphones connected to your interface you will hear the inputs even if Pro Tools doesn't.

Samson sound deck not working